GEOlightとは
GEOlight Warm white Crisp and room-filling warm light
Warm White GL-WW-E26-B7W  1,980YEN(inc.tax)

The light with high color rendering index that makes food look delicious.

Room-filling light in the living room.

GEOlight Cool white Crisp and natural white
Cool White GL-CW-E26-B7W  1,980YEN(inc.tax)

Suitable for deskwork which needs clear light.

Makes everything look stylish.

Specification of GEOlight

Specification Warm White
GL-WW-E26-B7W
Cool White
GL-CW-E26-B7W
size length: 113mm diameter: 59mm length: 113mm diameter: 59mm
Weight 170g 170g
Input Voltage(V) AC90〜240 50/60 Hz AC90〜240 50/60 Hz
Input Current(mA) 72 79
Consumption Power(W) 7.2※1 7.2※1
Power Factor(PF) 0.9 0.9
Lumen 300lm 350lm
lifespan about 40,000 hours※2 about 40,000 hours※2
Operation temperature -20oC〜40oC -20oC〜40oC
Color rendering index more than Ra 90 more than Ra 70
Color Temperature 2,700K(±10%) 5,500K(±10%)
aterproof and dustproof IP 65※3(except cap) IP 65※3(except cap)

※1 consumed power is 7.2W.

※2 no guarantee of product lifespan.changes depending on circumstances.

※3 means fanction of protecting from water and dust.(unavailable in water)

Reliable water resistance
Water proof function considering outside use such as the entrance,yard,and car park.

※ unavailable in water
※ not including cap

Warning

・Keep distance from burnable materials such as cloth and paper.

・Do not use with direct current.

・Make sure to turn off the power before attaching,removing bulb or cleaing the device.

・Do not use with dimmable function device, emergency lighting system, HID lighting device, insulating device ”indicated SG,SGI,SG”, electronic device with flicking function.

・Do not use with encapsulated type device that might make lifespan shorter because of temperature increase.

・Not intended for use with motion sensor lighting and stop switch delay ventilator.

・There are individual differences for each light-emitting diode. Appreciate your understanding that color and brightness might be slightly different despite the same product line.

・There are differences in color, brightness, and beam angle from filament bulb. There might be some cases that appropriate distribution of light or brightness are not provided depending on lighting devices such as the one to put bulb sideways.

Caution

・Use the bulb within the power consumption indicated on the device.

・There is a possibility that the device rolls over or fall down with a table lamp or multi-lighting device because of heavy weight of the bulb.

・Make sure to screw in bulb tightly.

・Do not hit or scratch.

・Be careful to touch during lighiting or just after turning off the light because of the heat of the bulb.

application consideration

・Turn off the bulb promptly if some failures occur in the bulb.

・Do not insert foreign objects to any spaces in the bulb.

・Recommend to replace the bulb before it exceeds lifespan.

・Do not wash or take apart product. Can not be replaced only the element.

・Do not use under the circumstance of over 40oC."Recommened condition is -20oC~40oC"

・Keep distance from radio,television and the device with infrared remote control function.It might make noise or lead disfunction of lighting.

・Do not keep looking straight the bulb for the safety reason.

・Use only with 50Hz、60Hz.

PAGE TOP

COPYRIGHT (C) AGASTA, ALL RIGHTS RESERVED.